SS MIG Welding Wire rod ER316 ER316L ER316LSi: $3000-$3200 / Ton: ER 316LSi SS Tig Weld Wire 1mm 1.2mm 0.8mm 1.5mm: $1000-$6500 / Ton: Available Types of Stainless Steel 316L Filler Wires / Welding Electrode. stainless steel er-316l filler wire chemical composition, 316L stainless steel filler wire exporter in india. Product. Chemical composition (mass fraction) (wt.%) of the AWS ER316L Mechanical Properties of steel grade AWS ER316L Physical Properties of steel grade AWS ER316L Heat Treatment of steel grade AWS ER316L Heat treated : 1437C - 1886C Technological Curves of steel grade AWS ER316L No Curve Cross Reference Table (Equivalent Grade) of AWS ER316L Low carbon content recommended where there is a risk of intergranular corrosion. Pinnacle Alloys ER316L is well suited for applications in the chemical and petrochemical industries. It is an all position welding MIG Wire. Feeding wire smoothly will enable stable arc, excellent welding performance and spatter is very low. ER316L - WIRE - MIG (GMAW) - STAINLESS STEEL AWS A5.9 Welding Positions: All INTRODUCTION: The main component of ER316L is 18Cr-12Ni-2Mo. Manufacturer, Supplier & exporter of Stainless Steel ER-316L Filler Wires, SS 316L Welding Filler Wires, Stainless Steel UNS S31683 TIG Welding Wire, SS ER316L Industrial Filler Wire. Aluminum MIG and TIG Reliable, high quality aluminum MIG and TIG welding products with tight tolerances in chemical composition. The maximum carbon content is maintained at or below 0.03% to increase resistance to intergranular corrosion. Suitable for service temperature from -120C to + 400C. It has good resistance for acetic acid, sulfuric acid, phosphoric acid and salt . This item WeldingCity ER316L Stainless Steel MIG Welding Wire 2-Lb Spool 0.030" (0.8mm) Blue Demon 308LFC-O X .035 X 1# Spool stainless steel flux cored gasless welding wire Forney 42300 Flux Core Mig Wire, Mild Steel E71TGS.030-Diameter, 2-Pound Spool, Silver, Pack of 1 Suitable for service temperature from -120 to +400 C. temperatures. Higher productivity could be realized in the MIG welding process. Deposited All Weld Metal Properties Data is typical for ER316L weld metal deposited by Tig using 100% Argon as the shielding gas. . This filler metal has the same analysis as ER316, except that the carbon content is limited to a maximum of 0.03% in order to reduce It offers excellent corrosion and pitting resistance in marine and industrial environments. Class: ER316L AWS: A5.9 Conforms to Certification: AWS A5.9 ASME SFA A5.9 Weld Process Used for Tig (GTAW) AWS Chemical Composition Requirements C = 0.03 max Cr = 18.0 - 20.0 Ni = 11.0 - 14.0 Mo = 2.0 - 3.0 Mn = 1.0 - 2.5 Si = 0.30 - 0.65 P = 0.03 max S = 0.03 max Cu = 0.75 max Available Sizes .030 x 36 .035 x 36 .045 x 36 1/16 x 36 3/32 x 36 Designed to be used primarily with basic fluxes that recover nearly all of the wire chromium in the deposit. Select Diameter .030 .035 . Also suitable for the weldingof grades 316Nb or Ti stabilized (347 and 321) if service temperature below 400 C. 1. SUS316L). The weld-ability is good. ER316L main component is 18Cr-12Ni-2Mo; it is Stainless steel TIG welding wire. AWS A5.9 ER316L Stainless Steel TIG Welding Wire is suitable for petrochemical industry, pressure vessel, cryogenic tank, fertilizer, urea, food machinery, and other industries to weld 18%Cr-12%Ni-2%Mo stainless steel (e.g. CHEMICAL COMPOSITION (%): Chemical . Technical Data Sheet Alloy ER 316LSi is used for welding low carbon molybdenum-bearing austenitic alloys. It is mainly used for welding structures in chemical industry or in power . . Main Application. HAZARD IDENTIFICATION Color gray Physical State Solid Odor Odorless AWS A5.9: ER316L is a solid wire rod for GTAW, suitable to weld austenitic stainless steels grades 1.4401 / 316, 1.4404 / 316L, 1.4435 / 316L. Class: ER316L AWS: A5.9 Conforms to Certification: AWS A5.9 ASME SFA A5.9 Weld Process Used for Mig (GMAW) and Submerged Arc (SAW) AWS Chemical Composition Requirements C = 0.03 max Cr = 18.0 - 20.0 Ni = 11.0 - 14.0 Mo = 2.0 - 3.0 Mn = 1.0 - 2.5 Si = 0.30 - 0.65 P = 0.03 max S = 0.03 max Cu = 0.75 max Application AWS A5.9 ER316L Chemical Composition of Inweld 316L Single values are maximum unless otherwise specified. For welding 18% chromium - 12% nickel - 2% molybdenum austenitic stainless steels such as 316 and 317 but with a low ferrite (i.e. ER3016L is austenite extra-low carbon stainless steel MIG wire. It offers improved corrosion and pitting resistance in marine and industrial environments. Production specification Data center describes many of the common steel models, we can not determine the company's warehouse has all types of steel products inventory or raw materials. It has good res Feeding wire smoothly will enable stable arc, excellent welding performance and spatter is very low. Class: ER316L AWS: A5.9 Conforms to Certification: AWS A5.9 | ASME SFA A5.9 Weld Process Used for Mig: (GMAW) and Submerged Arc (SAW) AWS Chemical Composition Requirements C = 0.03 max Cr = 18.0 - 20.0 Ni = 11.0 - 14.0 Feeding wire smoothly will enable stable arc, excellent welding performance and spatter is very low. AWS A5.9: ER316L is a solid wire electrode for GMAW, suitable to weld austenitic stainless steels grades 1.4401 / 316,1.4404 / 316L, 1.4435 / 316L. Pinnacle Alloys ER316LSi has a nominal composition (wt.-%) of 19 Cr, 12.5 Ni, 2.5 Mo, with a carbon content restricted to 0.03 maximum. Smooth finish free from surface defects and foreign matter. This low carbon alloy is not as strong at . DIAMETERS:.025", .030", .035", .045", 1/16", 3/32", 1/8", 5/32" WELDING POSITIONS: GTAW & GMAW: All positions b) Based on L 0 = 5.65 S 0 where L 0 is the original gauge length and S 0 the original cross-section area.. Impact strength. ER316L - WIRE - MIG (GMAW) - STAINLESS STEEL AWS A5.9 Welding Positions: All INTRODUCTION: The main component of ER316L is 18Cr-12Ni-2Mo. Class: ER316LSI AWS: A5.9 Conforms to Certification: AWS A5.9 ASME SFA A5.9 Weld Process Used for Mig (GMAW) and Submerged Arc (SAW) AWS Chemical Composition Requirements C = 0.03 max Cr = 18.0 - 20.0 Ni = 11.0 - 14.0 Mo = 2.0 - 3.0 Mn = 1.0 - 2.5 Si = 0.65 - 1.00 P = 0.03 max S = 0.03 max Cu = 0.75 max Available Sizes - Diameter X Spool Sizes CONFORMANCE WIRE COMPOSITION DETAILS Stainless steel welding rods designed to provide optimal bead appearance when TIG welding on a variety of materials Features Low carbon content reduces the possibility of carbide precipitation and intergranular corrosion The 2-3% molybdenum improves pitting corrosion resistance of the weld deposit Introduction Stainless steel, classified under five groups as martensitic, ferritic, austenitic, precipitation hardened and double phase, are widely used in industries, such as the food industry, chemistry, power engineering, medical applications, high or subzero temperature applications, petroleum, petrochemical and textile, transport and architectural applications. ER316L filler metal is primarily used for welding low carbon molybdenum-bearing austenitic alloys. Due to its austenitic microstructure, Sandvik 3R65 has very good impact strength both at room temperature and at cryogenic temperatures. It is an all position welding MIG Wire. Deposited Chemical Composition % (Typical) C = 0.015 Mo = 2.50 P = 0.010 Cr = 18.75 Mn = 1.80 S = 0.010 Ni = 12.25 Si = 0.34 Deposited All Weld Metal Properties Data is typical for ER316L weld metal deposited by Mig using Argon + 2% oxygen and Tig using 100% Argon as the shielding gas. AWS A5.9 ER316L Gas shielded Solid Welding Wire is 18Cr-12Ni-2Mo; it is Stainless steel MIG welding wire. This low carbon alloy is not as strong at elevated temperatures as ER316H. 0.75 max. Also suitable for the weldingof grades 316Nb or Ti stabilized (347 and 321) if service temperature below 400 C. Diameter. The weld-ability is good. The 2-3% molybdenum improves pitting corrosion resistance of the weld deposit. Alloy ER 316L is primarily used for welding low carbon molybdenum-bearing austenitic alloys. Certificate of Conformance Alloy: 316L Specification: AWS A5.9 ER316L Chemical Composition Limits Carbon (C) 0.03 Nickel (Ni) 11.0-14.0 Chemical Composition (%) Welding Positions: Diameter. Q2 Lot - Certificate showing actual wire composition and calculated ferrite number (FN) available online 0.03% carbon content increases resistance to intergranular corrosion Ink jet printing identification on entire length of electrode CONFORMANCES SHIELDING GAS 100% Argon Stainless AWS ER316, ER316L KEY FEATURES AWS A5.9/A5.9M: . Box 655326 Dallas, TX 75265 -5326 2. This low carbon material reduces the possibility of intergranular carbide precipitation. FN2) it can also be used for welding 304/304L to 316/316L stainless steels in cryogenic service at temperatures down to -452 F With many yeas production experience, strict control AWS ER316L chemical composition and AWS ER316L mechanical properties. 1 MPa = 1 N/mm 2 a) R p0.2 and R p1.0 correspond to 0.2% offset and 1.0% offset yield strength, respectively. WIRE COMPOSITION DETAILS Used for welding similar alloys (containing approximately 2% molybdenum). AWS: ER316, ER316L. its weld metal has good anticorrosion to acetic acid, phosphoric acid, sulphurous acid, salt, particularly anticorrosion to chloridion and it has good performance of heat-resisting and crack-resisting. DIAMETERS:.023", .030", .035", .045", 1/16", 3/32", 1/8", 5/32" TYPICAL CHEMICAL COMPOSITION (Wt %): Also used for high temperature service applications. The weld-ability is good. It is all position welding. Product Name ER316L Product Code ER316L Recommended use Tig wire Chemical nature Inorganic solid blend Information on Manufacturer Emergency Telephone Number X-ERGON by Partsmaster, Div of NCH Corp. CHEMTREC800-424-9300 P.O. AWS A5.9: ER316L is a submerged arc welding wire intended for welding austenitic stainless steels 1.4435 / 316L. . This filler metal is similar to ER316L, with higher silicon content for optimum ease in welding and smooth bead appearance. Characteristics and Application Check ER316L Filler Wire Chemical Composition and Price. Typical Mechanical Properties Availability Pinnacle Alloys ER316L serves as a general purpose electrode for GMAW, GTAW, and SAW welding. Description and Applications ER316L is primarily used for welding low carbon molybdenum-bearing austenitic alloys. This increases the resistance to intergranular corrosion without the use of stabilizers, such as niobium or titanium. Features. This filler metal has the same analysis as ER316, except that the carbon content is limited to a maximum of 0.03% in order to reduce the possibility of formation of intergranular carbide precipitation. Designed with low carbon & 2-3% Mo to improve corrosion & pitting resistance. Suitable for service temperature from -120C to + 400C.